All Issue

2019 Vol.15, Issue 4 Preview Page

Research Article

31 December 2019. pp. 493-501
Abstract
Purpose: The purpose of this study is to prevent construction safety accidents, and the design safety systems were reviewed. This paper aims to establish as an effective system by looking at the implementation procedures and contents of the design safety review system. Method: We reviewed the purpose and content of the law, accident statistics, etc. for the study. In addition, we looked at the implementation plans for actual construction sites using the 'design safety' assessment process as defined by the Act. Results: We divided it into the data review phase, the risk factor elicitation and alternative setup phase, and the design safety assessment report preparation stage. Conclusion: it is necessary to derive risk factors that take into account the diversity of construction sites. However, the effectiveness of other reports is questioned as they are often copied and written. Therefore, it is necessary to strengthen external verification procedures attended by construction safety experts.
연구목적: 건설안전 재해를 예방하기 위해 건설기술진흥법에서는 ‘설계 안전성 검토’ 제도를 시행하고 있다. 이에 본 논문에서는 ‘설계안전성 검토’ 제도에서 정한 규정의 실효성을 확보하기 위해 실제 건설현장에서의 시행 절차와 내용을 분석함으로써 해당 제도가 올바르게 정착되어 건설재해 예방에 기여하는데 그 목적이 있다. 연구방법: 건설기술진흥법에서 정한 설계 안전성 제도에서는 자료 검토 단계, 위험요소 도출 및 대안 설정단계, 설계안전성 평가 보고서 작성단계를 거쳐 최종적으로 위험요소에 대한 설계 반영단계 등의 각 단계별 적용사례를 분석하였다. 연구결과: 설계 안전성 제도에 따라 작업공종별로 철근콘크리트 공사, 건설기계공사, 토공공사, 가시설 등 건설사업의 형태별로 다양한 위험요소(Hazard)가 도출되었고, 이 위험요소의 위험등급별 우선순위를 도출하고 이를 해결하기 위해 실제 사례를 작성해 본 결과 다양한 공정에서의 설계 반영사례가 도출되었다. 결론: 본 연구를 통해 A공사에서 적정 기준에 맞는 굴착구배(1:0.3)를 채택했음에도 빈번한 토사 붕괴 사고의 문제를 개선하기 위해 관로터파기 경사에 준해 설계도면에 1:0.5를 채택하여 새로운 설계도면에 반영하였고, 그 결과 현행 굴착구배 기준을 강화의 강화 필요성을 도출하였다.
References
  1. Kim, J.-W. (2018). "Disaster Risk Assessment by Work Unit of Construction Work for Improve the Efficiency of Design for Safety Task", Architectural Institute of Korea, Journal of The Architectural Institute of Korea Structure & Construction, Vol. 34, No. 6, pp. 45-53.
  2. Lee, G.-J. (2018). "Application of Desing for Safety to improve Safety Environment on Construction Site", Korea Institute of Ecological Architecture and Environment, KIEAE Journal. Vol. 18, No. 5 , pp. 113-120.10.12813/kieae.2018.18.5.113
  3. Ministry of Employment and Labor (2018) State of Industrial Accidents, Statistics Report.
  4. Report on Design Safety Review (2018), Incheon International Airport Development Project 1st Stage Infrasturcture Creation.
Information
  • Publisher :The Korean Society of Disaster Information
  • Publisher(Ko) :한국재난정보학회
  • Journal Title :Journal of the Society of Disaster Information
  • Journal Title(Ko) :한국재난정보학회논문집
  • Volume : 15
  • No :4
  • Pages :493-501